Medical clean board refers to the board installed in the clean room of the hospital. This clean board has the excellent characteristics of antibacterial, anti-skid, fireproof, safe, green and environmental protection. It has been widely used in hospitals. So as a medical clean board manufacturer, here are some installation methods for clean boards:

hospitalThe decorative panels used in clean rooms generally think that the fewer joints, the better, but it does not mean that no joints are the best. There are three installation methods for the medical clean board used in the clean room:

If the foundation partition does not involve the installation and displacement of wires, or the renewal of an old building, you can leave a cavity for the wires to pass through, and then build the keel. The keel cavity can not only solve the line problem, but also play the role of sound insulation, heat insulation and heat insulation by injecting thermal insulation cotton. This installation system must be an anti-corrosion, anti-static and easy to install safety system. It is recommended to use a frame and slat system.

No cavity treatment. The foundation wall is made of gypsum board, cement board or wooden board. The surface is flat and can be directly fixed on the foundation wall with aluminum alloy profiles and special glue. Aluminum profiles mainly play a decorative role, not a main bearing point. This type of installation generally uses a large-size board. The bottom of the board and the ground can be coated with a thick layer of mildewproof gluePVCNo additional treatment is required for coil coverage. The inner corner attachment can be used at the connection with the ceiling, and the attachment color should be the same color as the board or milky white.

The third installation method is the simplest and most convenient. It is similar to the second attachment attachment type, except that the aluminum profile is omitted for decoration.

ThisAfter years of decoration experience and continuous improvement, these installation methods are safe, labor-saving and durable installation methods.everyoneYou can choose one or more mixed methods according to your design requirements.